2024 New First 18 SE Beneteau

Engines

Standard Features

CONSTRUCTION

• Hull and deck constructed with hand layup of Soric and foam sandwich with glass fibres reinforced with polyester and vinyl ester resin

• Chainplates bolted to the hull

• Hull reinforced with a stringer and bulkheads of the two insubmersibility chambers

• Deck with moulded high traction non-skid

• Two transoms hung rudders built of GRP foam sandwich mounted in custom aluminium cassettes

• Bolts, screws and fittings made of marine-grade stainless steel

• Hull and deck moulded in single tone off-white

• Hull sheave in a gel coat finish - prepared for the application of antifouling

KEEL ARRANGEMENT

• Cast iron swinging keel with PE epoxy primer and antifouling protection

• Stainless steel winch with dyneema high modulus rope for hoisting the keel

• Safety pin arrangement for fixing the keel in the keel box

• Slots trip keel lips closing the exit of the keel box

• Lifting straps attachment point on the top of the keel box

DECK EQUIPMENT

• Stainless steel chain plates for shrouds and forestay

• Semicircular opening hatch on the foredeck for light and ventilation

• Ronstan blocks and cleats for the mainsail, jib and gennaker control lines

• Ronstan jib track

• Composite tiller with Ronstan tiller extension

• Soft (neoprene) cover while sailing and hard (plexiglass and GRP) cover

• for storage and transport

• Attachments for engine bracket on stern

• Bilge pump operated from the cockpit

MAST & RIGGING SAILS

• Carbon fibre mast and boom with local reinforcements

• Mast protected with UV resistant foil, boom and bowsprit spraypainted with UV clear coat

• Retractable carbon fibre bowsprit

• On-deck gennaker snuffer system

• Bartels stainless steel jib furler set

• U-bolt mooring rings on mid-bow and stern (3x)

• Custom mast foot which allows for easy setting of the mast without a crane

• 1x19 standing rigging with bottle screw adjusters

• Outhaul with 2:1 purchase led inside the boom

• Mainsheet with cleat, swivel, ratchet and four ball-bearing low friction blocks

• 6:1 boom vang purchase

• Two 2:1jib sheets with blocks and cleats

• One 2:1 Dyneema main halyard with cleat

• One Dyneema jib halyard

• One masthead gennaker halyard/gennaker retrieving line

• One bowsprit control line

• Composite shackles for attachments

• Two gennaker sheets

• 8:1 Cunningham control line with blocks and cleats

SAILS

• North Sails OneDesign racing square-top full-batten mainsail, Pentex laminate, 15,6 m2 / 168 ft2

• North Sails OneDesign racing furling jib with vertical battens and zipper along the luff, Pentex laminate, 9,0 m2 / 97 ft2

OTHER EQUIPMENT

• Shrouds tension gauge

• Purse with keys for assembly

• Lock system for the main entrance hatch

• Mast transport bag

INTERIOR

• Interior covered with topcoat and with white gel coat on the moulded parts for clean and low maintenance finish

• Double V-berth with insubmersibility volume underneath

• Storage volume place under the sides of the cockpit

• Keel winch protective cover

Optional Features

SHALLOW SWING KEEL

• Swing keel built-in cast iron, with PE epoxy primer and antifouling protection

• Draft of 1,1 m / 3’7’’ in the lowered position and 0,3 m / 11’’ in the lifted position

OTHER OPTIONS

COCKPIT STORAGE HATCH

• Plastic hatch with the lock placed under the tiller system

• Offers access to additional storage space under the cockpit.

ROPE BAGS

• Two rope bags in the cockpit for the clean cockpit area

SUN TEN WITH POLES

• Tyvek sun shade over the boom

• Equipped with telescopic tent poles and elastics for easier fixation

INSTRUMENT BRACKET

• Custom instrument bracket fixed on gooseneck axe under the boom

• Double Dual-Lock velcro tape for fixation of the instrument

MOORING PACK

• Foldable anchor, 4 kg / 8,81 lbs

• 40m/8mm 131,23ft / 0,47inch anchor rope with 10m lead insert, 2 kg / 4,4 lbs

• Outils Ocean storage bag for the anchor

• Mooring lines with spliced ends 10m/8mm 32’10’’ / 0,47inch, 4x, spliced ends

• Custom square fenders Outils Ocean with fixation ropes, 4x

LIFTING STRAPS

• Three lifting straps connected in a single lifting point

• Safety loop for lifting straps

• Possible craning with a stepped mast

Status

Build To Order

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

customContactInformation

For additional information please contact

Nautical Ventures

At:(954) 926-5250 or via email at [email protected]

VIDEO