2024 New First 27 SE Beneteau

Engines

Standard Features

 CONSTRUCTION

• Hull and deck constructed with Vacuum Infusion of Vinyl ester resin, foam and Soric GRP sandwich with unidirectional and biaxial laminates

• Hull is reinforced with Infused GRP stringers in the keel and bow sections

• Hull and deck are moulded in single tone off-white,

• Deck with high traction non-skid moulded

• Carbon fibre beams laminated on keel box and glued to the deck to support mast compression and keel hydraulic ram

• Two transoms hung balanced rudders, built of GRP foam sandwich,

• Red chainplates bolted to the main structural bulkhead

• Bolts, screws and fittings are all made of stainless marine grade stainless steel

• Faired underwater areas, ready for sanding, epoxy primer and antifouling application

KEEL ARRANGEMENT

• Swinging keel with “elephant leg” lead bulb, main steel structural element and epoxy GRP enclosure

• Laminated areas of the keel are pre-painted with epoxy primer for easier antifouling treatment

• Manually operated hydraulic pump with stainless steel hydraulic ram built in the Carbon fibre mast support

DECK EQUIPMENT

• 60 cm high stainless steel pulpit, pushpit and six stanchions painted in mat black, with double lifelines

• Stainless steel bow and stern mooring cleats

• Stainless steel chain plates for side shrouds and forestay painted in mat red

• Four Wichard folding pad eyes for lifting straps at mid-two stations,

• 2x Harken STA15 secondary halyard winches and 2x Harken STA20 jib and gennaker trim primary winches

• 2x Spinlock winchfeeder on the coachroof

• Two rope bags and two winch handle bags, Outils Océans & First branded

• Wide mainsail traveller, installed over the tiller

• Carbon tiller with Spinlock EA1200DS tiller extension

• Laminated tempered glass windows on both sides of the hull

• An opening hatch of 58 cm x 58 cm / 23 x 23 inch for light

• ventilation and deck access to the mid-section compartment

• An opening hatch of 25,5 cm x 25,5 cm / 10 x 10 inch for front cabin ventilation

• Bow anchor locker with Dyneema J3 staysail attachment point on the deck

• Stern storage compartment cover

• Foldable outboard cockpit compartment with two top & one bottom cover and engine bracket for internal combustion outboard (not mounted)

• Manual bilge pump operated from the cockpit

MAST & RIGGING

• CompoTech mast and boom with two sets of swept-back spreaders build in high-quality carbon fibre

• Ronstan Series 19 aluminium track for mainsail cars (cars not included; they are part of the mainsail option)

• All carbon parts UV protected

• Mast transport & storage bag

• Continuous 1x19 standing rigging with

• Bottle screw adjusters

• Retractable carbon bowsprit controlled from the cockpit

• Dyneema pole-out control line

• Dyneema gennaker tackline

• 2:1 Dyneema mainsail halyard with Wichard MX8 halyard shackle

• Dyneema jib halyard

• 2:1 Dyneema staysail halyard

• Dyneema masthead gennaker halyard

• Dyneema fractional gennaker halyard

• 9x Spinlock clutches for halyards, mainsail reefs and bowsprit control lines

• Ronstan blocks and cleats for the mainsail, jibs and gennakers control lines

• One tapered mainsheet with ball bearing low friction blocks

• Three mainsail reef lines

• Control line for the mainsail traveller

• 8:1 outhaul purchase led inside the boom

• 8:1 cunningham purchase

• 16:1 vang purchase

• Three jib sheets

• Spliced Dyneema jib inhaulers with a fixed length,

• 2:1 jib downhaulers with control lines, cleats and blocks

• Two tapered gennaker sheets with blocks

• Mast transport & storage bag

ELECTRICITY

• Custom electric control panel with five switches and smart Philippi LCD battery control display

• Remotely controlled master switch on the control panel

• Standard 12V and USB plugs in the saloon

• 12V 70AH AGM battery

• Ambiental indirect LED lights around the ceiling

• One mid-section and two front cabin battery LED lights

• Masthead LED navigation and anchor light

• Sentinel tracker to connect, monitor and control boat systems remotely on your mobile phone with a 1-year subscription

• Pre-wiring for most of the available electrical options

INTERIOR

• Bulkheads and furniture lightly covered with mat paint with white gel coat on the moulded parts for light, clean and low maintenance finish

Front Cabin

• Double V-berth with insubmersibility volume underneath

• Opening hatch of 25,5 cm x 25,5 cm / 10 x 10 inch for front cabin ventilation

Mid-section compartment / Wet room

• An opening hatch of 58 cm x 58 cm / 23 x 23 inch for light

• ventilation and deck access to the mid-section compartment

• The base for chemical or flush toilette with monolithic reinforcements for valves on the starboard side

Saloon

• Bright and spacious saloon area with large Plexiglass companionway washboard and sliding hatch

• Dedicated storage place for washboard back of the companionway steps

• Benches on both sides of the saloon, divided into four wooden covers of the storage space underneath

• Main electric box and battery in aft port compartment and keel hydraulic pump under aft starboard compartment

• Padded back-supports with gimbal cooker holder attachment points on both sides and storage behind the nets

• Wide berths in the stern on both sides, with insubmersiblity chambers underneath

• Front and aft keel box covers with table attachment point with a screw on the aft

• Electric boxes under the ceiling and under the companionway

• Extra storage room under the companionway and engine box for fresh-water tank or other systems, with cover

• Two ergonomically shaped wooden companionway steps

• Well insulated 40L icebox below bottom companionway step, with fridge compressor upgrade possibility

• Light grey EVA foam floorboards

• Shrouds attachments counter plates painted in mat red

Status

Build To Order

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

customContactInformation

For additional information please contact

Nautical Ventures

At: (561) 612-7076 or via email at [email protected]

VIDEO